Nilai DIY 250W Stereo Amplifier


SKU: 27564-5-1-1-1-1 Category:


Nilai® Class D technology is here!

The Nilai500DIY is the long-awaited successor to the acclaimed NC400. Its polished shiny exterior is true reflection of what is to be found inside. The engine room houses a brand new control-loop topology that really boosts performance to the next level. It outperforms Ncore by not less than 10 times!

The module comes with a fully discrete buffer stage and on-board voltage regulators, just like the NC400 it’s replacing. Together with carefully selected high-grade components, the Nilai500DIY is our best sounding amplifier to date. We have created a truly special technique which sets a new benchmark for high-end audio applications and is a truly unique amplifier module for our DIY community.

Combining the Nilai500DIY with the matching PS500DIY will result in the best possible ready-to-go DIY-experience possible!

Build yourself a state-of-the-art high-end 2 times 250W stereo power amplifier with this DIY kit by DIYclassD. DIYclassD is part of Hypex Electronics. At DIYclassD our aim is to serve the global DIY community and consumer market for Hypex products.

With the easy to follow instructions you will be able to realize a high end power amplifier at a fraction of the cost and all of this can be done in just 30-60 minutes. Combined with our DIYclassD PreAmplifier kit you can create a complete set of superbly sounding equipment.

All you need to bring to the table is this box and a few tools: • Wire cutter (or combination plier)• 5.5 mm hex nut driver (or combination plier) • 7 mm hex nut driver (or combination plier) • 3.5 mm flat type screwdriver

Warranty: 5 years / 20.000h

Key Features

  • Ultra Low Distortion

  • Very Low Idle Power

  • Very Low Noise

  • Very Low Output Impedance

  • Incorporates Audiophile Components



  • 2 x Balanced XLR

  • 1 x Trigger 12V


  • 2 x Goldplated Bindingpost Set

           (Banana plug, Spade plug or Bare wire)

This kit contains:

  • Complete DIYclassD Nilai500DIY stereo case “matte black”,

  • Complete internal cable harness,

  • 1x PS500DIY power supply,

  • 2x Nilai500DIY amplifier module,

  • Inputboards & Frontboard,

  • All needed mounting materials,

  • Assembly instruction,

  • 1.5mm Allen key,

  • 2.5mm Allen key,

  • TX-10 Torx key,

  • TX-20 Torx key

  • Dimensions: 16.5″W x 12″D x 3″H

VTV offers assembly which includes full testing on our Audio Precision Test System

Additional information

Weight N/A
Dimensions N/A
Assembly Option

DIY Kit, Fully Assembled and Tested by VTV


There are no reviews yet.

Be the first to review “Nilai DIY 250W Stereo Amplifier”

Your email address will not be published. Required fields are marked *