SEVEN Channel VTV Amplifier 3+4

THREE Channels VTV Amplifier with Purifi-Audio 1ET400A modules PLUS

FOUR Channels NC252MP

This configuration perfect for home theater where rear channel require efficient, yet compact amplification.  Provides Purifi amplification where it is needed most: L-C-R

See Purifi-Audio DATASHEET here.

VTV Purifi Manual here

ASSEMBLED IN THE USA — 30 Day Trial

This is a brand new amplifier featuring:

—Multiple Input Buffer Options

—Hypex SMPS3KA400 power supply

—fully balanced design

—EMI/RFI filtered AC inlet

–12V Trigger

—MOGAMI input wiring standard

—-SPEAKON Outputs available

—Heavy, custom designed aluminum case with blue LED pilot.  (LED may be dimmed or shut-off by switch)

—Silver-coated speaker output wiring with TFE jacket

—Silver Faceplate Available

—2 Year Warranty

–19″W x 20″D ( including speaker posts) x 3.75″H  W: 32lbs

FIVE Channel VTV Amplifier 3+4

Three Channels VTV Amplifier with Hypex NC500OEM modules PLUS

FOUR Channels NC252MP

This configuration perfect for home theater where rear channel require efficient, yet compact amplification.  Provides Purifi amplification where it is needed most: L-C-R

See NC500OEM DATASHEET here.

ASSEMBLED IN THE USA — 30 Day Trial

This is a brand new amplifier featuring:

—Multiple Input Buffer Options

—Hypex SMPS3KA700 power supply – 3000W

—fully balanced design

—EMI/RFI filtered AC inlet

–12V Trigger

—MOGAMI input wiring standard

—-SPEAKON Outputs available

—Heavy, custom designed aluminum case with blue LED pilot.  (LED may be dimmed or shut-off by switch)

—Silver-coated speaker output wiring with TFE jacket

—Silver Faceplate Available

—2 Year Warranty

–19″W x 20″D ( including speaker posts) x 3.75″H  W: 32lbs

See Purifi-Audio DATASHEET here.

VTV Purifi Manual here

ASSEMBLED IN THE USA — 30 Day Trial

This is a brand new amplifier featuring:

—Multiple Input Buffer Options

—Hypex 3000W power supply provides exceptional headroom

—fully balanced design

—EMI/RFI filtered AC inlet

–12V Trigger

—SPEAKON ouput connectors available

—Hypex NCore high-end input cable

—Heavy, custom designed aluminum case with blue LED pilot.  (LED may be dimmed or shut-off by switch)

—Silver-coated speaker output wiring with TFE jacket

—2 Year Warranty

–19″W x 20″D ( including speaker posts) x 3.75″H  W: 32lbs

See Hypex NC500OEM DATASHEET here.

VTV NCore Manual here

ASSEMBLED IN THE USA — 30 Day Trial

This is a brand new amplifier featuring:

—Multiple Input Buffer Options

—Hypex SMPS3KA700 power supply

—fully balanced design

—Silver Faceplate Available

—EMI/RFI filtered AC inlet

–12V Trigger

—MOGAMI input wiring standard

—-SPEAKON Outputs available

—Heavy, custom designed aluminum case with blue LED pilot.  (LED may be dimmed or shut-off by switch)

—Silver-coated speaker output wiring with TFE jacket

—2 Year Warranty

–19″W x 20″D ( including speaker posts) x 3.75″H  W: 32lbs

The Nilai500DIY is the long-awaited successor to the acclaimed NC400. Its polished shiny exterior is true reflection of what is to be found inside. The engine room houses a brand new control-loop topology that really boosts performance to the next level. It outperforms Ncore by not less than 10 times!

The module comes with a fully discrete buffer stage and on-board voltage regulators, just like the NC400 it’s replacing. Together with carefully selected high-grade components, the Nilai500DIY is our best sounding amplifier to date. We have created a truly special technique which sets a new benchmark for high-end audio applications and is a truly unique amplifier module for our DIY community.

Combining the Nilai500DIY with the matching PS500DIY will result in the best possible ready-to-go DIY-experience possible!

Build yourself a state-of-the-art high-end 2 times 250W stereo power amplifier with this DIY kit by DIYclassD. DIYclassD is part of Hypex Electronics. At DIYclassD our aim is to serve the global DIY community and consumer market for Hypex products.

With the easy to follow instructions you will be able to realize a high end power amplifier at a fraction of the cost and all of this can be done in just 30-60 minutes. Combined with our DIYclassD PreAmplifier kit you can create a complete set of superbly sounding equipment.

All you need to bring to the table is this box and a few tools: • Wire cutter (or combination plier)• 5.5 mm hex nut driver (or combination plier) • 7 mm hex nut driver (or combination plier) • 3.5 mm flat type screwdriver

Warranty: 5 years / 20.000h

Key Features

• Ultra Low Distortion

• Very Low Idle Power

• Very Low Noise

• Very Low Output Impedance

• Incorporates Audiophile Components

Specifications:

Inputs

• 2 x Balanced XLR

• 1 x Trigger 12V

Outputs

• 2 x Goldplated Bindingpost Set

           (Banana plug, Spade plug or Bare wire)

This kit contains:

• Complete DIYclassD Nilai500DIY stereo case “matte black”,

• Complete internal cable harness,

• 1x PS500DIY power supply,

• 2x Nilai500DIY amplifier module,

• Inputboards & Frontboard,

• All needed mounting materials,

• Assembly instruction,

• 1.5mm Allen key,

• 2.5mm Allen key,

• TX-10 Torx key,

• TX-20 Torx key

• Dimensions: 16.5″W x 12″D x 3″H

VTV offers assembly which includes full testing on our Audio Precision Test System

The Nilai500DIY is the long-awaited successor to the acclaimed NC400. Its polished shiny exterior is true reflection of what is to be found inside. The engine room houses a brand new control-loop topology that really boosts performance to the next level. It outperforms Ncore by not less than 10 times!

The module comes with a fully discrete buffer stage and on-board voltage regulators, just like the NC400 it’s replacing. Together with carefully selected high-grade components, the Nilai500DIY is our best sounding amplifier to date. We have created a truly special technique which sets a new benchmark for high-end audio applications and is a truly unique amplifier module for our DIY community.

Combining the Nilai500DIY with the matching PS500DIY will result in the best possible ready-to-go DIY-experience possible!

With the easy to follow instructions you will be able to realize a high end power amplifier at a fraction of the cost and all of this can be done in just 30-60 minutes. Combined with our DIYclassD PreAmplifier kit you can create a complete set of superbly sounding equipment.

All you need to bring to the table is this box and a few tools: • Wire cutter (or combination plier)• 5.5 mm hex nut driver (or combination plier) • 7 mm hex nut driver (or combination plier) • 3.5 mm flat type screwdriver

Warranty: 5 years / 20.000h from Hypex

Key Features

• Ultra Low Distortion

• Very Low Idle Power

• Very Low Noise

• Very Low Output Impedance

• Incorporates Audiophile Components

Specifications:

Inputs

• 1 x Balanced XLR

• 1 x Trigger 12V

Outputs

• 1 x Goldplated Bindingpost Set

       (Banana plug, Spade plug or Bare wire)

This kit contains:

• Complete DIYclassD Nilai500DIY mono case “matte black”,

• Complete internal cable harness,

• PS500DIY power supply,

• Nilai500DIY amplifier module,

• Inputboard & Frontboard,

• All needed mounting materials,

• Assembly instruction,

• 1.5mm Allen key,

• 2.5mm Allen key,

• TX-10 Torx key,

• TX-20 Torx key

VTV offers assembly which includes full testing on our Audio Precision Test System

400W per channel @ 8ohms  ; 600W Channel @ 4 ohms both channels driven ; 2 ohm capable/stable

ASSEMBLED IN THE USA — 30 Day Trial

This is a brand new amplifier featuring:

—GaNFET Output stage

—2000W Custom Regulated SMPS

—FULLY Digital design with PCM converted to PWM in output stage—-use a digital source with volume control for a simple HIGH END solution.

NOTE:  This is an all digital amp and has only a coax digital S/PDIF input.   It is designed to be the basis of an all-digital system that takes digital music sources directly from source to amplifier output stage.

Suitable for many streamers:  Grimm, Auralic, Lumin, Esoteric, Hifi Rose  to name a few.

OR make your own ROON endpoint streamer: HIFIBerry Digi2 PRO    Use the HifiBerry hat on Raspberry Pi running RoPiee software to form a ROON endpoint.  (works with ROON installation on your existing system )

—-NO Global Feedback

—EMI/RFI filtered AC inlet

—Heavy, custom designed aluminum case with blue LED pilot.  (LED may be dimmed or shut-off by switch)

—Silver-coated speaker output wiring with TFE jacket

—2 Year Warranty

–12.25″W x 13″D (not including speaker posts) x 4.25″H  W:15 lbs

NC500OEM output is 350W@8 ohms – 500W@4 Ohms

See Hypex NC500OEM DATASHEET here.

VTV NCore Manual here

ASSEMBLED IN THE USA — 30 Day Trial

This is a brand new amplifier featuring:

—Multiple Input Buffer Options

—Hypex SMPS3KA700 power supply

—fully balanced design

—Silver Faceplate Available

—EMI/RFI filtered AC inlet

–12V Trigger

—MOGAMI input wiring standard

—-SPEAKON Outputs available

—Heavy, custom designed aluminum case with blue LED pilot.  (LED may be dimmed or shut-off by switch)

—Silver-coated speaker output wiring with TFE jacket

—2 Year Warranty

–19″W x 20″D ( including speaker posts) x 3.75″H  W: 32lbs

FIVE Channel VTV Amplifier 3+2

Three Channels VTV Amplifier with Hypex NC500OEM modules PLUS

Two Channels NC252MP

This configuration perfect for home theater where rear channel require efficient, yet compact amplification.  Provides Hypex NCore amplification where it is needed most: L-C-R

See NC500OEM DATASHEET here.

VTV NC252MP DATASHEET here

ASSEMBLED IN THE USA — 30 Day Trial

This is a brand new amplifier featuring:

—Multiple Input Buffer Options

—Hypex SMPS3KA700 power supply

—fully balanced design

—EMI/RFI filtered AC inlet

–12V Trigger

—MOGAMI input wiring standard

—-SPEAKON Outputs available

—Heavy, custom designed aluminum case with blue LED pilot.  (LED may be dimmed or shut-off by switch)

—Silver-coated speaker output wiring with TFE jacket

—Silver Faceplate Available

—2 Year Warranty

–19″W x 20″D ( including speaker posts) x 3.75″H  W: 32lbs

Ideal for Multi Way Speaker Designs or Two-Way Active Monitors with separate Subwoofers

USA ASSEMBLED — 30 Day Trial — Prompt Support in the USA

PASCAL X-PRO3 Datasheet here

VTV PASCAL Manual here

This is a brand new amplifier featuring:

PASCAL X-PRO3 modules

1500Wx2 400Wx4 into 8 Ohm Load 

2500WX2 800Wx4 into 4 Ohm Load

The X-Pro series features amazing, clean power and sonic excellence: exceptional soundstage, detail and black background.  The X-Pro series also has some the of the best protection in the Class D world: overload, DC at output protection (see full protection range on datasheet). 

PASCAL amps are DEAD quiet at turn-on and shut-off…..no pops or other noises.

—-RCA Inputs

—EMI/RFI filtered AC inlet

—Heavy, custom designed aluminum rack mount case with blue LED pilot.  (LED may be dimmed or shut-off by switch)

—Silver-coated speaker output wiring with TFE jacket

–19″W x 18″D (not including speaker posts) x 4″H    36 lbs